Contact Supplier
Mr. GUS ZHANG
Leave a message Mr. GUS ZHANGWhat can I do for you?
| Unit Price: | USD 235 / Square Meter |
|---|---|
| Payment Type: | T/T,Paypal,Western Union |
| Incoterm: | FOB |
| Min. Order: | 200 Square Meter |
| Delivery Time: | 10 Days |
Basic Info
Model No.: EMI-150W
Type: Transparent Conductive Film
Transparency: Transparent
Hardness: Soft
Feature: With Glue
Roll Length: 400m
Resistance: <0.5ohm/sq
Roll Width: 1500mm
Additional Info
Packaging: Carton
Productivity: 30000Sqm/Month
Transportation: Air
Supply Ability: 30000Sqm/Month
HS Code: 39206900
Port: ShenZhen
150 mesh copper grid pet film,with adhesive, can be directly sticked to existed glass/touch screen, used for EMI shielding, anti radiation, to keep information safety.
| TECHNICAL DATA SHEET |
| Physical property parameters | ||||||
| item | unit | Performance Index | Detection Method | Remark | ||
| EMI-150 | ||||||
| Thickness | Protective film | μm | 50～60 | ASTM D374 | Optional | |
| First layer | | metal mesh layer | | |||
| Substrate | μm | 125+5 | Material:PET | |||
|
| Ahesive | | | Available | ||
| Mesh shape |
| 45° |
|
| ||
| Mesh width | μm | 17 |
|
| ||
| Mesh spacing | μm | 143 |
|
| ||
| Visible light transmittance | % | ≥75 | GB/T 2410-2008 |
| ||
| Surface resistance (conductive side) | ohm | ≤0.09 | Four probe surface resistance tester |
| ||
| Adhesion (conductive side) |
| At least reach two-grade | GB/T 9286-1998 |
| ||
| Adhesive peel strength | g/25mm | ≥100 | GB/T 2792-1998 | For glass panel | ||
| Wet-heat resistant property | Resistance variation | % | ≤30 | 65℃、90% 100hours | ΔR/R0 | |
| Light transmittance change | % | ≤5 | ΔT/T0 | |||
| SHIELDING EFFECT |
| Main performance | ||||||||||||
| Model | Transmittance | Frequency(DB) | ||||||||||
| 14K | 100K | 10M | 30M | 150M | 450M | 950M | 1G | 3G | 6G | 10G | ||
| EMI-150（150Mesh） | >75% | 11 | 13 | 38 | 49 | 76 | 63 | 55 | 53 | 44 | 40 | 35 |
| APPLICATION |
All Metal Mesh Pet Film products have stable resistance, very small tolerance, with super high transmittance 80%.
Deposited conductive coatings are very thin and are easily scratched or cracked if handled improperly. When removing film from a roll, care should be taken not to bend or crease it. It is important never to allow the conductive side to come in contact with a surface, such as a table, during processing operations.
| COMPANY INTRODUCTION |
| CANTON FAIR SHOW |
Moire fringes can be completely avoided without adjusting the angle of the anti-glare shielding film, the conductive surface is blackened, and the performance is stable!
Product Categories : Conductive Film > Metal Mesh Pet Film
Hot Products
