Product Categories
(Total 12 Products for Mm Anti Noise Emi Film)
1500mm wide Self Adhesive 150Opi Metal Mesh Shielding Film For Unmanned Shop RFID Block
150 mesh copper grid pet film,with adhesive, can be directly sticked to existed glass/touch screen, used for EMI shielding, anti radiation, to keep information safety. Physical property parameters item
0.25mm White FRPP Film for Car Decor Insulation
FRPP WT-10 is a halogen free flame retardant polypropylene film in roll and in sheet. Due to its excellent anti chemical property and electrical property, this film is a good insulation layer of electric car battery. FRPP WT white PP film is available from thickness 0.05mm(min) -1.2mm upon market demand. Roll supplied...
El Printing Transparent Ito Film
ITO PET FILM is produced by magnet vacuum sputter technology, to sputter ITO (Indium Tin Oxide) onto the optical Polyester film, to achieve the film one side conductive meanwhile optical transmittance. PROX-100, resistance around 100ohm/sq, transmittance about 77%, this model of transparent conductive film is widely...
Super Thin PTFE Anticorrosive Film 0.01 x 1500mm
PTFE Anticorrosive Dielectric Non-stick Film Polytetrafluoroethylene film is made of suspended polytetrafluoroethylene resin by moulding, sintering and cooling into blank, and then by turning and rolling Manufactured with excellent dielectric properties, non - aging, best corrosion properties and wide range of service...
0.01-0.5mm PTFE Super Thin High Temperature Film
0.01-0.5mm PTFE Super thin high temperature film PTFE Anticorrosive Dielectric Non-stick Film Polytetrafluoroethylene film is made of suspended polytetrafluoroethylene resin by moulding, sintering and cooling into blank, and then by turning and rolling Manufactured with excellent dielectric properties, non - aging,...
0.02mm Chinese PTFE Anticorrosive Insulation Film
0.02mm Chinese PTFE anticorrosive insulation film PTFE Anticorrosive Dielectric Non-stick Film Polytetrafluoroethylene film is made of suspended polytetrafluoroethylene resin by moulding, sintering and cooling into blank, and then by turning and rolling Manufactured with excellent dielectric properties, non - aging,...
0.05mm PVF Transparent Gas Sample Bag Film
0.05mm PVF transparent Gas Sample bag Film 0.05X1500mm width PVF film , also known as polyvinyl fluoride film (polyvinyl fluoride), referred to PVF. And a thermoplastic resin . Odorless, non-toxic white powder. Density 1.38. 240 °C above decomposition . Has a crystal structure, high transparency ( via UV ) , high...
1200mm Width Chinese PFA UV Resistance Tape-casting Film
1200mm Width Chinese PFA UV Resistance Tape-casting Film 0.0125mm - 0.5mm x Width 50-1200mm PFA film is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property....
Metal Mesh Film WSLDM85B Electromagnetic Shielding 3H anti Scratch EMF Shielding Film
The new generation of WSLDM85B electromagnetic shielding film has natural product vision, no distortion of dynamic and static objects, and the shielding film has no grid feeling and no color difference. Innovatively optimized in both the selection of metal mesh width and the grid angle arrangement, which can ensure...
Narrow PFA tape-Casting 3D Printing Release Film 280mm
Narrow PFA tape-Casting 3D Printing Release Film 280mm 0.0125mm - 0.5mm x Width 280mm MOQ 50kgs PFA film is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric...
0.25-0.5mm FEP Tape-Casting Anticorrosive Dielectric Film
0.25-0.5mm FEP Tape-Casting Anticorrosive Dielectric Film Made in China 0.0125-0.5mm x Max 1200mm
Perfect tolerance +-0.005mm
Perfect tensile strength FEP not only has similar properties to ptFE, but also has good machining properties of thermoplastic. Therefore, it makes up for the shortage of the processing...
FEP 3D Printing Release Film 0.1 0.15 0.2mm
FEP 3D Printing Release Film 0.1 0.15 0.2mm FEP fluoroplastic film has perfect properties of non-stick, temperature resistance,dielectric,mechanical,abrasive resistance etc. It is suitable for 3D printing(UV curable) releasing . FEP film has perfect releasing force,it can meets kinds of proucts' releasing requirements...
Categories
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
