Contact Supplier
Mr. GUS ZHANG
Leave a message Mr. GUS ZHANGWhat can I do for you?
| Unit Price: | USD 16 / Square Meter |
|---|---|
| Payment Type: | T/T,Paypal,Western Union |
| Incoterm: | FOB |
| Min. Order: | 200 Square Meter |
| Delivery Time: | 7 Days |
Basic Info
Model No.: PROX-100
Type: Metallized Film
Transparency: Transparent
Hardness: Soft
Substrate: Pet Film
Tranmisttance: >77%
Roll Width: 750mm
Resistance: 100ohm/sq
Haze: <3%
Heat Shrinkage (MD): 0.8%
Heat Shrinkage (TD): 0.3%
Thickness: 125/175um
Application: EL Printing
Additional Info
Packaging: Carton
Productivity: 30000Sqm/Month
Transportation: Fedex or DHL or UPS or TNT
Place of Origin: CN
Supply Ability: 30000Sqm/Month
HS Code: 39206900
Port: ShenZhen,MianYang
ITO PET Film is produced by magnet vacuum sputter technology, to sputter ITO (Indium Tin Oxide) onto the optical Polyester film, to achieve the film one side conductive meanwhile optical transmittance. PROX-100, resistance around 100ohm/sq, transmittance about 77%, this model of transparent Conductive Film is widely used for electroluminescent printing. Due to low shrinkage and stable resistance, optical Ito Coated Pet Film is also an ideal choice as transparent electrode for EL lamps.
ITO FILM TECHNICAL DATA SHEET
No. Property Unit Data Test Method 1 Visible Light Transmission % ≥77 Transparency Testing Machine 2 Hue (b value) - 0≤b≤4 Transparency Testing Machine 3 Haze % ≤3 Haze Meter 4 Thickness um 125/175 Spiral Micrometer 5 Square Resistance ohm/sq 100 Four Probe Resistivity Meter 6 Resistance Uniformity ohm/sq +/-10 Four Probe Resistivity Meter 7 Heat Shrinkage MD % 0.8 130C *30min 8 Heat Shrinkage TD % 0.3 9 Roll width mm 750 Ruler
EL PANEL STRUCTURE
ITO FILM PICTURE
ELECTRONIC UNIFORMITY
All Ito Pet Film products feature electrical uniformity of 10% within any one square foot area, defined as the maximum difference from the average ohms per square value within that area. However, touch screen manufacturers typically achieve <1% resistance linearity by orienting their sensors (busbars) so that the electrical current path is always in the direction of the length of the film roll.
HANDLING CONDUCTIVE ITO FILM
Vacuum deposited ITO coatings are very thin and are easily scratched or cracked if handled improperly. When removing film from a roll, care should be taken not to bend or crease it. It is important never to allow the ITO coated side to come in contact with a surface, such as a table, during processing operations. Sliding ITO coating over a surface will scratch the coating, resulting in elevated surface resistance and visible defects. Please note that all ITO PET FILM product supplied in sheet form is supplied with protective liner on all surfaces.
ORDERING ITO PET FILM
PROCHEMA sells ITO PET FILM products in roll form 750 width. When ordering rolls of film, please correctly specify the film thickness (microns, mils or gauge units), film width, length of film on each roll and number of rolls desired. Rolls are supplied on 3 inch cores depends on your requirements.
PACKAGE
Product Categories : Conductive Film > Ito Pet Film
Hot Products
